product-thumb-cactus-rf60
Cactus Flash RF60Cactus Purchase Guide

Cactus RF60 Flash

£123.00

New Low PricePrice includes VAT (£102.50 excl. VAT)

The Cactus RF60 Wireless flash combined with the Cactus V6 Transceiver is the World’s First wireless flash trigger system that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL at the same time.

→ View special offers

In stock

SKU: CT-002 Categories: , Tags: , ,

Cactus RF60 Product Description

CE and FCC complianceAll Cactus products are both CE and FCC compliant, which means you can use them anywhere in Europe and the USA and the units comply with their respective radio frequency laws.

What is the Cactus RF60 Flash?

The Cactus RF60 Flash is a portable speedlight that has a built-in wireless transmitter + receiver – three features combined into one.

What are the advantages of using wireless Cactus Flash RF60?

With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.

Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.

Built-in wireless commander and receiver

The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).

Remote control of power and zoom levels

The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.

Group control of up to four groups with configurable Group Alias

In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.

Cactus RF60 optical slave with delay feature

The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.

High power up to Guide Number of 56 meters

The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.

Compatible with Cactus V6 Wireless Flash Transceiver

Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.

Multi-flash feature

In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.

HSS Sympathy mode

The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.

The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.

Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.

  • Guide Number (ISO 100):
Zoom (mm) 24 28 35 50 70 80 105
GN (meter) 33 34 38 45 51 54 56
GN (feet) 108 112 124 147 168 177 183
    • Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
    • Power levels (22 in total):
1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/128
1/2
+0.3
1/4
+0.3
1/8
+0.3
1/16
+0.3
1/32
+0.3
1/64
+0.3
1/128
+0.3
1/2
+0.7
1/4
+0.7
1/8
+0.7
1/16
+0.7
1/32
+0.7
1/64
+0.7
1/128
+0.7
  • Flash durations: 1/300s – 1/20,000s
  • Modes: Local (L), Master (M), and Slave (S)
  • Working radio frequency: 2.4GHz
  • Number of channels: 16
  • Number of groups: 4
  • Maximum wireless effective distance: 100 meters (328 feet)
  • Built-in optical slave mode: S1 (straight triggering); S2 (pre-flash ignored triggering)
  • Flash head swivel: 270-Degree (180-Degree left and 90-Degree right)
  • Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance
  • Flash count per battery cycle: 100 (at 1/1 power); 2000 (at 1/128 power)
  • Minimum recycle time: 0.1-5.0 seconds (with alkaline batteries); 0.1-3.0 seconds (with Sanyo Eneloop)
  • Color temperature: 5600k +/- 200k
  • Operating temperature: -20°C to +50°C
  • Dimensions: 205 x 83 x 61mm
  • Net weight: 390g

Reviews

There are no reviews yet.

Be the first to review “Cactus RF60 Flash”

product-thumb-cactus-rf60
Cactus Flash RF60Guide d\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’achat Cactus

Cactus RF60 Flash

£123.00

New Low PricePrice includes VAT (£102.50 excl. VAT)

The Cactus RF60 Wireless flash combined with the Cactus V6 Transceiver is the World’s First wireless flash trigger system that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL at the same time.

→ View special offers

In stock

SKU: CT-002 Categories: , Tags: , ,

Cactus RF60 Product Description

CE and FCC complianceAll Cactus products are both CE and FCC compliant, which means you can use them anywhere in Europe and the USA and the units comply with their respective radio frequency laws.

What is the Cactus RF60 Flash?

The Cactus RF60 Flash is a portable speedlight that has a built-in wireless transmitter + receiver – three features combined into one.

What are the advantages of using wireless Cactus Flash RF60?

With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.

Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.

Built-in wireless commander and receiver

The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).

Remote control of power and zoom levels

The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.

Group control of up to four groups with configurable Group Alias

In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.

Cactus RF60 optical slave with delay feature

The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.

High power up to Guide Number of 56 meters

The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.

Compatible with Cactus V6 Wireless Flash Transceiver

Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.

Multi-flash feature

In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.

HSS Sympathy mode

The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.

The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.

Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.

  • Guide Number (ISO 100):
Zoom (mm) 24 28 35 50 70 80 105
GN (meter) 33 34 38 45 51 54 56
GN (feet) 108 112 124 147 168 177 183
    • Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
    • Power levels (22 in total):
1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/128
1/2
+0.3
1/4
+0.3
1/8
+0.3
1/16
+0.3
1/32
+0.3
1/64
+0.3
1/128
+0.3
1/2
+0.7
1/4
+0.7
1/8
+0.7
1/16
+0.7
1/32
+0.7
1/64
+0.7
1/128
+0.7
  • Flash durations: 1/300s – 1/20,000s
  • Modes: Local (L), Master (M), and Slave (S)
  • Working radio frequency: 2.4GHz
  • Number of channels: 16
  • Number of groups: 4
  • Maximum wireless effective distance: 100 meters (328 feet)
  • Built-in optical slave mode: S1 (straight triggering); S2 (pre-flash ignored triggering)
  • Flash head swivel: 270-Degree (180-Degree left and 90-Degree right)
  • Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance
  • Flash count per battery cycle: 100 (at 1/1 power); 2000 (at 1/128 power)
  • Minimum recycle time: 0.1-5.0 seconds (with alkaline batteries); 0.1-3.0 seconds (with Sanyo Eneloop)
  • Color temperature: 5600k +/- 200k
  • Operating temperature: -20°C to +50°C
  • Dimensions: 205 x 83 x 61mm
  • Net weight: 390g

Reviews

There are no reviews yet.

Be the first to review “Cactus RF60 Flash”

product-thumb-cactus-rf60
Cactus Flash RF60Cactus Guida all\\\\\\\\\\\\\\\\\\\\\’acquisto

Cactus RF60 Flash

£123.00

New Low PricePrice includes VAT (£102.50 excl. VAT)

The Cactus RF60 Wireless flash combined with the Cactus V6 Transceiver is the World’s First wireless flash trigger system that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL at the same time.

→ View special offers

In stock

SKU: CT-002 Categories: , Tags: , ,

Cactus RF60 Product Description

CE and FCC complianceAll Cactus products are both CE and FCC compliant, which means you can use them anywhere in Europe and the USA and the units comply with their respective radio frequency laws.

What is the Cactus RF60 Flash?

The Cactus RF60 Flash is a portable speedlight that has a built-in wireless transmitter + receiver – three features combined into one.

What are the advantages of using wireless Cactus Flash RF60?

With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.

Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.

Built-in wireless commander and receiver

The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).

Remote control of power and zoom levels

The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.

Group control of up to four groups with configurable Group Alias

In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.

Cactus RF60 optical slave with delay feature

The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.

High power up to Guide Number of 56 meters

The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.

Compatible with Cactus V6 Wireless Flash Transceiver

Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.

Multi-flash feature

In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.

HSS Sympathy mode

The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.

The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.

Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.

  • Guide Number (ISO 100):
Zoom (mm) 24 28 35 50 70 80 105
GN (meter) 33 34 38 45 51 54 56
GN (feet) 108 112 124 147 168 177 183
    • Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
    • Power levels (22 in total):
1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/128
1/2
+0.3
1/4
+0.3
1/8
+0.3
1/16
+0.3
1/32
+0.3
1/64
+0.3
1/128
+0.3
1/2
+0.7
1/4
+0.7
1/8
+0.7
1/16
+0.7
1/32
+0.7
1/64
+0.7
1/128
+0.7
  • Flash durations: 1/300s – 1/20,000s
  • Modes: Local (L), Master (M), and Slave (S)
  • Working radio frequency: 2.4GHz
  • Number of channels: 16
  • Number of groups: 4
  • Maximum wireless effective distance: 100 meters (328 feet)
  • Built-in optical slave mode: S1 (straight triggering); S2 (pre-flash ignored triggering)
  • Flash head swivel: 270-Degree (180-Degree left and 90-Degree right)
  • Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance
  • Flash count per battery cycle: 100 (at 1/1 power); 2000 (at 1/128 power)
  • Minimum recycle time: 0.1-5.0 seconds (with alkaline batteries); 0.1-3.0 seconds (with Sanyo Eneloop)
  • Color temperature: 5600k +/- 200k
  • Operating temperature: -20°C to +50°C
  • Dimensions: 205 x 83 x 61mm
  • Net weight: 390g

Reviews

There are no reviews yet.

Be the first to review “Cactus RF60 Flash”

product-thumb-cactus-rf60
Cactus Flash RF60Guía Cactus Compra

Cactus RF60 Flash

£123.00

New Low PricePrice includes VAT (£102.50 excl. VAT)

The Cactus RF60 Wireless flash combined with the Cactus V6 Transceiver is the World’s First wireless flash trigger system that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL at the same time.

→ View special offers

In stock

Cactus RF60 Product Description

CE and FCC complianceAll Cactus products are both CE and FCC compliant, which means you can use them anywhere in Europe and the USA and the units comply with their respective radio frequency laws.

What is the Cactus RF60 Flash?

The Cactus RF60 Flash is a portable speedlight that has a built-in wireless transmitter + receiver – three features combined into one.

What are the advantages of using wireless Cactus Flash RF60?

With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.

Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.

Built-in wireless commander and receiver

The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).

Remote control of power and zoom levels

The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.

Group control of up to four groups with configurable Group Alias

In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.

Cactus RF60 optical slave with delay feature

The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.

High power up to Guide Number of 56 meters

The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.

Compatible with Cactus V6 Wireless Flash Transceiver

Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.

Multi-flash feature

In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.

HSS Sympathy mode

The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.

The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.

Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.

  • Guide Number (ISO 100):
Zoom (mm) 24 28 35 50 70 80 105
GN (meter) 33 34 38 45 51 54 56
GN (feet) 108 112 124 147 168 177 183
    • Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
    • Power levels (22 in total):
1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/128
1/2
+0.3
1/4
+0.3
1/8
+0.3
1/16
+0.3
1/32
+0.3
1/64
+0.3
1/128
+0.3
1/2
+0.7
1/4
+0.7
1/8
+0.7
1/16
+0.7
1/32
+0.7
1/64
+0.7
1/128
+0.7
  • Flash durations: 1/300s – 1/20,000s
  • Modes: Local (L), Master (M), and Slave (S)
  • Working radio frequency: 2.4GHz
  • Number of channels: 16
  • Number of groups: 4
  • Maximum wireless effective distance: 100 meters (328 feet)
  • Built-in optical slave mode: S1 (straight triggering); S2 (pre-flash ignored triggering)
  • Flash head swivel: 270-Degree (180-Degree left and 90-Degree right)
  • Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance
  • Flash count per battery cycle: 100 (at 1/1 power); 2000 (at 1/128 power)
  • Minimum recycle time: 0.1-5.0 seconds (with alkaline batteries); 0.1-3.0 seconds (with Sanyo Eneloop)
  • Color temperature: 5600k +/- 200k
  • Operating temperature: -20°C to +50°C
  • Dimensions: 205 x 83 x 61mm
  • Net weight: 390g

Reviews

There are no reviews yet.

Be the first to review “Cactus RF60 Flash”

product-thumb-cactus-rf60
Cactus Flash RF60Guía Cactus Compra

Cactus RF60 Flash

£123.00

New Low PricePrice includes VAT (£102.50 excl. VAT)

The Cactus RF60 Wireless flash combined with the Cactus V6 Transceiver is the World’s First wireless flash trigger system that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL at the same time.

→ View special offers

In stock

Cactus RF60 Product Description

CE and FCC complianceAll Cactus products are both CE and FCC compliant, which means you can use them anywhere in Europe and the USA and the units comply with their respective radio frequency laws.

What is the Cactus RF60 Flash?

The Cactus RF60 Flash is a portable speedlight that has a built-in wireless transmitter + receiver – three features combined into one.

What are the advantages of using wireless Cactus Flash RF60?

With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.

Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.

Built-in wireless commander and receiver

The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).

Remote control of power and zoom levels

The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.

Group control of up to four groups with configurable Group Alias

In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.

Cactus RF60 optical slave with delay feature

The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.

High power up to Guide Number of 56 meters

The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.

Compatible with Cactus V6 Wireless Flash Transceiver

Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.

Multi-flash feature

In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.

HSS Sympathy mode

The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.

The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.

Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.

  • Guide Number (ISO 100):
Zoom (mm) 24 28 35 50 70 80 105
GN (meter) 33 34 38 45 51 54 56
GN (feet) 108 112 124 147 168 177 183
    • Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
    • Power levels (22 in total):
1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/128
1/2
+0.3
1/4
+0.3
1/8
+0.3
1/16
+0.3
1/32
+0.3
1/64
+0.3
1/128
+0.3
1/2
+0.7
1/4
+0.7
1/8
+0.7
1/16
+0.7
1/32
+0.7
1/64
+0.7
1/128
+0.7
  • Flash durations: 1/300s – 1/20,000s
  • Modes: Local (L), Master (M), and Slave (S)
  • Working radio frequency: 2.4GHz
  • Number of channels: 16
  • Number of groups: 4
  • Maximum wireless effective distance: 100 meters (328 feet)
  • Built-in optical slave mode: S1 (straight triggering); S2 (pre-flash ignored triggering)
  • Flash head swivel: 270-Degree (180-Degree left and 90-Degree right)
  • Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance
  • Flash count per battery cycle: 100 (at 1/1 power); 2000 (at 1/128 power)
  • Minimum recycle time: 0.1-5.0 seconds (with alkaline batteries); 0.1-3.0 seconds (with Sanyo Eneloop)
  • Color temperature: 5600k +/- 200k
  • Operating temperature: -20°C to +50°C
  • Dimensions: 205 x 83 x 61mm
  • Net weight: 390g

Reviews

There are no reviews yet.

Be the first to review “Cactus RF60 Flash”